500T powder forming hydraulic press
The hydraulic system of the four-column hydraulic press can achieve stepless adjustment, and can realize smooth processing according to the processing type and the needs of the processing process, thereby ensuring the quality of the processing. The four-column hydraulic press is mainly used for the pressing processing of various molds, and the precision and detail requirements of the molds are relatively high. The four-column hydraulic press can achieve precise control of the processing force when pressurizing, thereby ensuring the stability and accuracy of the processing quality.
Since the four-column hydraulic press has a high degree of automation during operation and can work continuously for a long time, its processing capacity is much greater than manual processing. At the same time, the hydraulic system can adjust the processing force and speed in time during the processing, reduce the processing time to a minimum, and improve production efficiency. The four-column hydraulic press adopts hydraulic system transmission, which can realize the transmission and preservation of energy, and can save energy consumption compared with traditional mechanical processing methods.
| Technical Parameters | Y32-100T | Y32-150 | Y32-200T | Y32-250T | Y32-315T | Y32-500T | Y32-630T | Y32-800T | Y32-1000T | Y32-1200T | |
| Nominal pressure(KN) 公称压力(KN) |
1000 | 1500 | 2000 | 2500 | 3150 | 5000 | 6300 | 8000 | 10000 | 12000 | |
| System pressure(Mpa) 系统压力(Mpa) |
25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
| Slider stroke(mm) 滑块行程(mm) |
260 | 260 | 500 | 500 | 500 | 700 | 800 | 700 | 800 | 1100 | |
| Maximum opening height(mm) 最大开口高度(mm) |
440 | 350 | 800 | 720 | 800 | 1000 | 1300 | 1200 | 1500 | 1700 | |
| Effective size of workbench 工作台有效尺寸(mm) |
The left and right sides 左右 |
640 | 640 | 720 | 720 | 800 | 1400 | 1400 | 1200 | 1500 | 3500 |
| The front and rear sides 前后 |
550 | 550 | 700 | 700 | 700 | 1400 | 1400 | 1500 | 1300 | 2000 | |
| Slider speed(mm/s) 滑块速度(mm/s) |
ldle stroke 空程 |
120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 150 |
| Feeding 工进 |
14 | 14 | 14 | 14 | 14 | 15 | 12 | 12-16 | 12 | 17.5 | |
| Back tracking 返程 |
72 | 72 | 72 | 65 | 69 | 130 | 130 | 130 | 130 | 135 | |
| Ejection force(KN) 顶出力(KN) |
- | - | - | - | - | 630 | 1000 | 1000 | 1000 | 3000 | |
| under cylinder stroke(mm) 下顶缸行程(mm) |
- | - | - | - | - | 260 | 320 | 320 | 320 | 450 | |
| Motor power(KW) 电机功率(KW) |
5.5 | 5.5 | 11 | 11 | 15 | 22×2 | 22×2 | 22×2 | 30×2 | 37×2 | |
| 价格 | 4500-5000 | 6000-8000 | 8500-10000 | 10000-120000 | 13000-15000 | 20000-30000 | 22000-32000 | 25000-32000 | 30000-40000 | ||
| 重量 | 3 | 5 | 7.5 | 11 | |||||||
Powder forming hydraulic presses have a wide range of applications
Powder forming machines have a wide range of applications, mainly in powder metallurgy, cemented carbide, magnetic materials, electronic ceramics and other related industries that require powder pressing and forming.
These devices can meet the pressing and forming requirements of multi-step complex products, and are particularly suitable for the production of precision and complex shaped products.
Advantages of Powder Forming Hydraulic Press
Powder forming hydraulic press has two structures to choose from: four-column type and frame type according to the characteristics of the workpiece. The hydraulic main engine, pump station and electric control operation cabinet are placed separately, with flexible layout. The main oil cylinder adopts a horizontal multi-cylinder layout. With the cooperation of the hydraulic system synchronous valve and proportional valve, the product molding precision is high, the surface is smooth and does not require modification.
Economical, practical, and high precision
Computer optimized structural design, four-column structure is simple, economical, and practical; frame structure has good rigidity, high precision, and strong anti-eccentric load capacity.
Soft landing process
The hydraulic control system adopts a plug-in integrated system, which is reliable in action and has no impact in speed conversion, which protects the mold and increases the service life of the mold and equipment.
Pre-pressing process with adjustable speed
According to the technical requirements of the product formula, the fluidity during pre-pressing can be set by numerical control, which is more suitable for the molding of large-area left and right, upper and lower complex structure products.
PLC computer numerical control
The temperature, curing time, pressure size, and speed control during product molding are all realized by PLC computer numerical control.
Multi-stage constant temperature deflation process can be set
The surface is smooth and does not require secondary modification, which can better avoid technical problems such as bubbles and shrinkage deformation on the surface of the product.
China Unicom manpower is specialized
in the work of foreign personnel in China,business,tourism,visiting relatives and other document services.
Application of machine tools and equipment of powder forming hydraulic press
1. The pressure of the upper punch for protecting the demoulding can be adjusted, which can help eliminate the cracking caused by the expansion of the blank during demoulding.
2. The action parameters of the press (pressing stroke, demoulding stroke, top pressing stroke, feeding height and pressing speed) can be adjusted and displayed on a scale.
3. There is an under-feeding (over-feeding) function with a fixed stroke to prevent powder from being sprayed and ensure stable loading.
4. Equipped with a multi-layer mold frame, it can meet the molding requirements of multi-step complex-shaped products.
5. The press is equipped with a rotary encoder, PLC and LCD display to facilitate the adjustment and control of the press.
6. The press also has optional functions: manipulator, pneumatic core rod and special-purpose core rod vibrator.
7. The press has a simple and clear structure, a high degree of automation, few failures, and simple maintenance. It is particularly suitable for pressing products with precise and complex shapes.
Shandong Sunshine Machinery Co., Ltd. is a manufacturing enterprise integrating development, research, manufacturing, sales and service. It has many years of experience in CNC lathe manufacturing, years of quality insistence, years of dedicated struggle and professional manufacturing.
Professional team
Senior project managers effectively control all aspects of the project
7x24 hours delivery
Located in 27 cities around the world,providing 200+ languages,7x24 hours delivery capacity,is the best partner for enterprise globalization
Hot Tags: 500T Powder Forming Hydraulic Press, China 500T Powder Forming Hydraulic Press manufacturers, suppliers, factory, Electric Tricycle Windshield Stamping Forming Hydraulic Press, Horizontal Hydraulic Press, Reinforced Composite Hydraulic Press, 630 Tons Sheep Licking Brick Hydraulic Press, Anchor Pallet Hydraulic Press, 500T Four Column Hydraulic Press With Servo System
