Products Description
Circular Saw Machine
In the fields of aerospace and automobile manufacturing, many parts need to be cut and processed with high precision. High-speed metal circular saw machines are widely used in parts processing in these fields due to their high precision and high efficiency.
| MODEL | XG-180 | |||
| Cutting Capacity | Bar | ● | mm | 70 〜180 |
| Angle | ■ | mm | 70 〜140 | |
| Round tube | ○ | mm | 70 〜180 | |
| Square tube | □ | mm | 70 〜140 | |
| Head spindle | Using TCT super hardcircular saw blade | mm | Φ 520t3.0 | |
| Spindle motor | kw | 22 | ||
| Spindle speed | rpm | 20 〜100 | ||
| Cut off feed mode | AC servo motor + ball screw l swing feedAC | |||
| Main clamp mode | Hydraulic l one set for vertical and one set for horizontal clamping | |||
| Saw blade debris removal device | Passive round wire brush I Active round wire brush (optional) | |||
| Gear Backlash CompensationDevice | Through shaft magnetic powder brake | |||
| Feeding clamp | Feeding driving mode | AC servo motor + ball screw I swing feedAC | ||
| Feeding clamp mode | Hydraulic I horizontal clamping | |||
| Material front end removal length | mm | 10~99 (no cutting head is optional) | ||
| Rear end residuelength | mm | 120+α | ||
| α is not enough to cut a workpiece | ||||
| Single feeding length | mm | 10-800 | ||
| Feeding device | Allowable feedinglength | mm | 3000-6000 | |
| Feeding mode | Pre arranged hydraulic lifting | |||
| Hydraulic drive | Type of hydraulic pump | Variable displacement piston pump | ||
| Hydraulic drive motor | kw | 3.75(4P) | ||
| Rated pressure of hydraulic system | Mpa | 7 | ||
| Hydraulic oil capacity | L | 120 | ||
| Size and weight | Weight(machine + rack) | kg | 7000 | |
| size | mm | 7700x3400x2250 | ||
| Other standardequipment | Anti vibration device for saw blade deflection | Tungsten carbide parallel block | ||
| Distributor | Pneumatic reciprocating | |||
| Automatic centralized grease lubrication system | Timing and quantitative forced oil supply | |||
| MQL tool micro lubrication SystemMQL | Quasi dry intermittent oil feeding | |||
| Chip conveyor | Chain plate l continuous or intermittent operation | |||
| Work lights | Led l waterproof and dustproofLED l | |||
| Electric control box heat exchanger | Closed high efficiency heat exchange system | |||
| optionaldevices | Centrifugal oil mist recovery machine | Multistage filtration, energy saving and environmental protection | ||
| Cluster feeder | Whole bundle feeding, long material cutting preferred | |||
| Third clamp | Scrap length 20+α (α is not enough to cut a workpiece) | |||
| wire brush | Active chip removal | |||
| Long material receiving device(discharging device) | Flexible selection of various ways, can be equipped with robot discharge code material | |||
Hot Tags: xn-75 metal circular saw machine, China xn-75 metal circular saw machine manufacturers, suppliers, factory
