High-speed circular saw machine
High-speed metal circular saw machine is a machine tool equipment specially used for cutting metal materials. It usually consists of saw blade, saw blade drive device, workbench, control system, etc., and uses high-speed rotating saw blade to cut metal materials. Compared with traditional cutting methods, high-speed metal circular saw machine has higher cutting efficiency, lower cutting cost and higher production benefits. Therefore, high-speed metal circular saw machine has been widely used in the field of metal processing.
Parameters of high-speed metal circular saw machine
| MODEL | XG-230 | |||
| Cutting Capacity | Bar | ● | mm | 110-230 |
| Angle | ■ | mm | 110 〜180 | |
| Round tube | ○ | mm | 110 〜230 | |
| Square tube | □ | mm | 110 〜180 | |
| Head spindle | Using TCT super hardcircular saw blade | mm | Φ 700t3.8 | |
| Spindle motor | kw | 30 | ||
| Spindle speed | rpm | 20 〜80 | ||
| Cut off feed mode | AC servo motor + ball screw l swing feedAC | |||
| Main clamp mode | Hydraulic l one set for vertical and one set for horizontal clamping | |||
| Saw blade debris removal device | Passive round wire brush I Active round wire brush (optional) | |||
| Gear Backlash CompensationDevice | Through shaft magnetic powder brake | |||
| Feeding clamp | Feeding driving mode | AC servo motor + ball screw I swing feedAC | ||
| Feeding clamp mode | Hydraulic I horizontal clamping | |||
| Material front end removal length | mm | 10~99 (no cutting head is optional) | ||
| Rear end residuelength | mm | 145+α | ||
| α is not enough to cut a workpiece | ||||
| Single feeding length | mm | 10-800 | ||
| Feeding device | Allowable feedinglength | mm | 3000-6000 | |
| Feeding mode | Pre arranged hydraulic lifting | |||
| Hydraulic drive | Type of hydraulic pump | Variable displacement piston pump | ||
| Hydraulic drive motor | kw | 5.5(4P) | ||
| Rated pressure of hydraulic system | Mpa | 7 | ||
| Hydraulic oil capacity | L | 120 | ||
| Size and weight | Weight(machine + rack) | kg | 9800 | |
| size | mm | 8300x3850x2570 | ||
| Other standardequipment | Anti vibration device for saw blade deflection | Tungsten carbide parallel block | ||
| Distributor | Pneumatic reciprocating | |||
| Automatic centralized grease lubrication system | Timing and quantitative forced oil supply | |||
| MQL tool micro lubrication SystemMQL | Quasi dry intermittent oil feeding | |||
| Chip conveyor | Chain plate l continuous or intermittent operation | |||
| Work lights | Led l waterproof and dustproof | |||
| Electric control box heat exchanger | Closed high efficiency heat exchange system | |||
| optionaldevices | Centrifugal oil mist recovery machine | Multistage filtration, energy saving and environmental protection | ||
| Cluster feeder | Whole bundle feeding, long material cutting preferred | |||
| Third clamp | Scrap length 20+α (α is not enough to cut a workpiece) | |||
| wire brush | Active chip removal | |||
| Long material receiving device(discharging device) | Flexible selection of various ways, can be equipped with robot discharge code material | |||
Structure of high-speed metal circular saw machine
High-speed metal circular saw machine mainly consists of the following parts:
Saw blade:
The main cutting tool of high-speed metal circular saw machine, made of high-strength material, with high hardness, wear resistance and high temperature.
Saw blade drive device:
A device used to drive the saw blade to rotate, including motor, reducer and bearings.
Workbench:
A device for placing and fixing metal materials to be cut, which can be moved up and down, left and right to adapt to the cutting of metal materials of different sizes.
Control system:
Used to control the operation of the entire high-speed metal circular saw machine, including start, stop, speed regulation and other functions.
Hot Tags: high-speed circular saw machine, China high-speed circular saw machine manufacturers, suppliers, factory
