automatic circular saw
Automatic circular saw processing utilizes advanced automation technology and is operated through a PLC controller, achieving a contactless, trouble-free working mode and simplifying the maintenance process. This processing method not only improves work efficiency, but also ensures the accuracy and stability of the work. The design of the circular saw machine takes into account the careful arrangement of the feeding system and supports multiple feedings, ensuring high sawing accuracy, long tool life, and correspondingly extended machine life. In addition, the automatic circulation of the cold cutting fluid ensures the smoothness of the working surface, and also facilitates the centralized processing of sawdust, making the working environment cleaner and safer.
Automatic circular saw parameters
| MODEL | XZ-90 | XZ-120 | XZ-150 | XZ-180 | XZ-200 | XZ-230 | PZ-260 | PZ-300 | |||
| Cutting Capacity | Bar | ● | mm | 12-90 | 20-120 | 40-150 | 70-180 | 80-200 | 110-230 | 120-260 | 160-300 |
| Angle | ■ | mm | 12-70 | 20-85 | 40-105 | 70-140 | 80-150 | 110-180 | 120-220 | 160-220 | |
| Round tube | ○ | mm | 12-90 | 20-120 | 40-150 | 70-180 | 80-200 | 110-230 | 120-260 | 160-300 | |
| Square tube | □ | mm | 12-70 | 20-85 | 40-105 | 70-140 | 80-150 | 110-180 | 120-220 | 160-220 | |
| Head spindle | Using TCT super hardcircular saw blade | mm | Φ315t2.25 | Φ380t2.6 | Φ460t2.7 | Φ520t3.0 | Φ630t3.4 | Φ700t3.8 | Φ750/840t4.0 | Φ840t4.0 | |
| Spindle motor | kw | 11 | 11/15 | 15 | 22 | 30 | 30 | 30/37/45 | 37/45 | ||
| Spindle speed | rpm | 20-100 | 20-80 | 20-70 | 20-70 | 20-60 | 15-50 | 15-40 | 15-40 | ||
| Cut off feed mode | AC servo motor + ball screw l swing feed | ||||||||||
| Main clamp mode | Hydraulic l one set for vertical and one set for horizontal clamping | ||||||||||
| Saw blade debris removal device | Passive round wire brush I Active round wire brush (optional) | ||||||||||
| Gear Backlash CompensationDevice | Through shaft magnetic powder brake | ||||||||||
| Feeding clamp | Feeding driving mode | AC servo motor + ball screw I swing feed | |||||||||
| Feeding clamp mode | Hydraulic I horizontal clamping | ||||||||||
| Material front end removal length | mm | 10~99 (no cutting head is optional) | |||||||||
| Rear end residuelength | mm | 75+α | 75+α | 85+α | 120+α | 120+α | 145+α | 145+α | 160+α | ||
| α is not enough to cut a workpiece | |||||||||||
| Single feeding length | mm | 10-800 | 10-800 | 10-800 | 10-800 | 10-800 | 10-800 | 10-800 | 10-800 | ||
| Feeding device | Allowable feedinglength | mm | 3000-6000 | ||||||||
| Feeding mode | Pre arranged hydraulic lifting | ||||||||||
| Hydraulic drive | Type of hydraulic pump | Variable displacement piston pump | |||||||||
| Hydraulic drive motor | kw | 2.25(4P) | 3.75(4P) | 3.75(4P) | 3.75(4P) | 5.5(4P) | 5.5(4P) | 5.5(4P) | 5.5(4P) | ||
| Rated pressure of hydraulic system | Mpa | 7 | |||||||||
| Hydraulic oil capacity | L | 90 | 110 | 120 | 120 | 120 | 120 | 160 | 170 | ||
| Size and weight | Weight(machine + rack) | kg | 5250 | 6000 | 6700 | 7000 | 9800 | 9800 | 12600 | 13000 | |
| size | mm | 7500×2900×2100 | 7500×3200×2250 | 7700×3400×2250 | 7700×3400×2250 | 8300×3850×2570 | 8300×3850×2570 | 8300×4150×2570 | 8300×4150×2570 | ||
| Other standardequipment | Anti vibration device for saw blade deflection | Tungsten carbide parallel block | |||||||||
| Distributor | Pneumatic reciprocating | ||||||||||
| Automatic centralized grease lubrication system | Timing and quantitative forced oil supply | ||||||||||
| MQL tool micro lubrication System | Quasi dry intermittent oil feeding | ||||||||||
| Chip conveyor | Chain plate l continuous or intermittent operation | ||||||||||
| Work lights | Led l waterproof and dustproof | ||||||||||
| Electric control box heat exchanger | Closed high efficiency heat exchange system | ||||||||||
| optionaldevices | Centrifugal oil mist recovery machine | Multistage filtration, energy saving and environmental protection | |||||||||
| Cluster feeder | Whole bundle feeding, long material cutting preferred | ||||||||||
| Third clamp | Scrap length 20+α (α is not enough to cut a workpiece) | ||||||||||
| wire brush | Active chip removal | ||||||||||
| Long material receiving device(discharging device) | Flexible selection of various ways, can be equipped with robot discharge code material | ||||||||||
Characteristics of circular saw cutting
1. High cutting efficiency: The saw blade of the circular saw is circular, which can quickly complete the cutting of wood, saving time and labor costs.
2. High cutting accuracy: The circular saw can change the cutting depth by adjusting the height of the saw blade, and can also cut wood at different angles by adjusting the inclination angle of the saw blade, thereby ensuring cutting accuracy.
3. Convenient operation: The circular saw is simple and safe to operate. When cutting, the operator only needs to place the wood on the saw bed according to the predetermined size and turn on the machine.
4. High reliability: The circular saw uses high-quality motors and bearings, and the whole machine structure is reliable and durable.
Precautions for cutting materials with circular saws
The circular saw machine is an efficient and precise cutting equipment with a wide range of application prospects. During use, you need to pay attention to safety and maintenance to better play its advantages and complete more cutting tasks.
Adjust the saw blade:
The cutting effect of the circular saw is greatly affected by the quality and selection of the saw blade, so you need to choose a suitable saw blade before use, and adjust the height and inclination angle of the saw blade according to the wood to be cut.
Safe operation:
Pay attention to the safety of the operator when cutting, and wear protective equipment such as safety gloves and goggles. At the same time, pay attention to the placement of the wood on the saw bed and the cutting direction of the saw blade.
Maintenance:
The circular saw machine should be regularly maintained and maintained, clean the saw blade and wood residue on the saw bed, and apply special lubricating oil for the saw blade to ensure the normal operation of the whole machine.
Pay attention to the power supply:
When using the circular saw machine, you need to choose a safe and reliable power supply, and avoid using a too long power cord to avoid affecting the service life of the machine.
Hot Tags: automatic circular saw, China automatic circular saw manufacturers, suppliers, factory
